Sharp foam pads

Posted on 15/10/2020


Finixa Sharp Foam Pads are produced in an environmentally friendly production line, using only solvent-free adhesives! We believe that it is in everyone's interest to continue developing ecological production methods. We took our responsibility years ago by avoiding solvent-based adhesives as much as possible. Several sanding pads on the market today are still coated with a solvent-based adhesive.

Not only are these of lower quality, but they also contribute enormously to air pollution and greenhouse gas emissions. In addition, the solvent-free adhesive of Finixa Sharp Foam Pads is not only flexible, but more importantly, also much more elastic than solvent-containing adhesives.

This is a great advantage for the life span, as the Finixa Sharp Foam Pads are less likely to tear. The solvent-free adhesive is also heat-resistant. No performance reduction only because of the sanding friction.

The Finixa Sharp Foam Pads are also coated with an extra ceramic-coated aluminum oxide grit, which makes them stronger and more durable. An additional advantage is that the ceramic coating also counteracts clogging, which also leads to a more uniform sanding result. The choice for the more expensive red ceramic AO grit makes the product unique and, in combination with the print on the side, clearly recognizable.

  • Sanding of hard-to-reach areas
  • Wet or dry sanding of paintwork for spot repair
  • Sanding of special shapes and contours
  • Sanding of  plastic parts, bumpers, spoilers, trim, door handles, mirror caps, etc. 
  • Intermediate dry sanding of hard-to-reach areas
  • Matting of contours and edges, preparation for clear coat or fade out
Watch the video
  • No risk of sanding through thanks to ‘pressure-equalizing’ foam
  • Highly adaptable to contours, curves and profiles
  • Can be crumpled up and stretched without creasing
  • Low clogging, exceptionally long life expectancy
  • Consistent performance throughout the life of the product
  • Very handy, both sides can be used
  • Can be used both dry and wet
  • Can be rinsed with water (saturated abrasive sponges)
  • Ensures a high quality and even finish
  • Faster sanding process = faster repair times
  1. The abrasive grain does not cut into the substrate as deeply and breaks off less, resulting in a more even surface finish.
  2. Less material is removed and no sanding through of the material occurs at the edges.
  3. No “finger marks” due to excess pressure
  4. We achieve a more consistent surface.
Do you have a technical or sales related question?
Or are you looking for a Finixa distributor near you? 
Ask your question via the form below.
The information you give us will not be shared with any third party.
Copyright © 2024 Chemicar Europe NV - Disclaimer - Privacy