TSP 1000 - High Gloss White 400ml
TSP 1000
A fast-drying, high-quality, professional topcoat that guarantees a superior finish. Achieve a brilliant high gloss with ease of application and constant atomization pressure. This topcoat offers excellent surface hardness and resistance to petrol, chemicals, and weather influences. Non-fading and UV resistant, it ensures long-lasting vibrancy. Enjoy very good polishability for that perfect shine. Available in both black and white to suit your finishing needs.
Key features
-
- • Fast-drying, high-quality, professional topcoat
-
- • High gloss
-
- • Easy application, constant atomization pressure
-
- • Good surface hardness
-
- • Resistant to petrol, chemicals and weather influences
-
- • Non-fading and UV resistant.
-
- • Very good polish ability
-
- • Available in black and white
Product details
- Colour
- white
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 25 °C
- Minimum storing temperature
- 5 °C
- Number
- TSP 1000
- Storing condition
- dark
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Application surfaces
- steel aluminum hard plastic zinc
- Base ingredient(s)
- solvent
- Dry layer film thickness
- 50 µm
- Drying IR-60°C
- 30 minutes
- Flash point
- -97 °C
- Gloss level
- 80 %
- Lead-free
- yes
- Maximum air humidity
- 80 %
- Minimum processing temperature
- 10 °C
- Paint type
- solvent-based
- Paintable
- no
- Pressure
- 2.5 bar
- Recommended curing temperature - IR
- 40 °C
- Recommended number of layers
- 3-4
- Resistances
- UV weather
- Solid content
- 53 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 500 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Flash between coats
- 15 minutes
- Full cure
- 2 hours
- Resprayable after
- 15 minutes
- Drying IR - 60°C
- 30 minutes
- Minimum Order Quantity
- 12
Application
-
TSP 1000 – 1010 application - Directions for use
- Surface Preparation: Thoroughly clean and sand the surface to remove any contaminants.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Always perform a test spray on a hidden area or scrap material.
- Application: Holding the can 20cm – 30cm (8-12 inches) from the surface, apply multiple thin coats.
- Drying Time: Allow 10-15 minutes between coats and a minimum of 24 hours for a full cure.
- Sealing: Optional: for added protection, finish off with a clear coat.
- Nozzle Maintenance: Invert the can and spray for 2-3 seconds to clear the nozzle.
Downloads
Language
| Name | Asset type | Language | File type | Download | |
|---|---|---|---|---|---|
|
|
08 Product comparison.pdf | Product_comparison | English | Download |