Experience the exceptional with our unique composition that allows swift sanding after just 3 seconds at 20°C, without clogging the sanding paper. Say goodbye to unnecessary abrasive consumption – unlike other products in the market, ours keeps waste to a minimum. Choose innovation, choose efficiency. Available in both classic black and vibrant green, this Sanding Guide is your shortcut to a seamless finish.
Key features
-
- • Unique sanding guide sands after 3 seconds without filling sandpaper, minimal abrasive consumption.
Product details
- Colour
- green
- Maximum storing temperature
- 25 °C
- Number
- TSP 320
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- no
- Base ingredient(s)
- talcum nitrocellulose
- Coverage
- 10 m²/L
- Dry layer film thickness
- 10 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 40 µm
- Pressure
- 3.7 bar
- Propellant
- butane propane
- Solid content
- 8.3 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 681 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Resprayable after
- 10 minutes
- Weight
- 0.391
- Minimum Order Quantity
- 12
Application
-
TSP 310 – 320 Application - Directions for Use:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease or loose material.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Application: Hold the can 8-12 inches away from the surface and apply a light, even coat.
- Drying: Allow a few minutes for the guide coat to dry to the touch.
- Sanding: Once dry, sand the area as usual; the guide coat will highlight imperfections and high spots.
- Clean Nozzle: Invert the can and spray for 2-3 seconds to clear the nozzle.