TSP 810 - Weld-thru primer phosphate zinc 400ml
TSP 810
An alkyd resin-based anti-corrosion solution specially crafted for SPOT, MIG, and TIG welding applications. Formulated with a high concentration of zinc in the dry film, this primer accelerates the welding process with minimal impact on the weld. Its excellent adhesive properties ensure effective protection before and after welding. Plus, this Zinc Phosphate primer is compatible with most lacquer systems, providing a reliable foundation for a range of applications.
Key features
-
- • Alkyd resin-based zinc-phosphate primer offers rust protection for welding applications.
Product details
- Colour
- grey
- Dry storage
- yes
- Freezing resistant
- yes
- Material
- zinc
- Maximum storing temperature
- 25 °C
- Number
- TSP 810
- Storing condition
- dark
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Base ingredient(s)
- talcum titanium dioxide carbon black alkyd resin
- Coverage
- 4 m²/L
- Dry layer film thickness
- 20 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 30 µm
- Pressure
- 3.2 bar
- Propellant
- butane propane
- Recommended number of layers
- 2-3
- Solid content
- 20.4 g/ml
- Solvents
- yes
- VOC
- 600 g/L
- Volume
- 0.4 L
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Minimum Order Quantity
- 12
Application
-
TSP 810 application
Directions for use:
- Surface Preparation: Clean the surface of dirt, grease, and rust. Sanding may be required for optimal adhesion.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Apply a test patch to ensure compatibility and desired results.
- Application: Hold the can 20cm – 30cm (8-12 inches) from the surface and spray a thin, even coat.
- Drying Time: Allow to dry for at least 10 minutes before welding.
- Weld: Perform your welding operations. The primer does not need to be removed prior to welding.
- Nozzle Maintenance: Invert the can and spray for 2-3 seconds to clear the nozzle.