TSP 410 - Zinc spray 400ml
TSP 410
Zinc Spray - your go-to solution for temporary metal protection. Whether it's pre or post-welding, or spot welding, this spray has you covered. With an impressive 85% zinc content, it provides excellent protection for naked metal. Plus, it's paintable with all 1 and 2K paints, including both solvent and water-based options.
Key features
-
- • This zinc spray can be used to temporarily protect naked metal before or after welding, can also be used for spot welding, paintable with all 1 and 2K paints, solvent and water based paints.
-
- • Contains 85% zinc.
Product details
- Colour
- grey
- Dry storage
- yes
- Freezing resistant
- yes
- Material
- zinc
- Maximum storing temperature
- 25 °C
- Number
- TSP 410
- Storing condition
- dark
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Base ingredient(s)
- epoxy alkyd resin
- Coverage
- 3 m²/L
- Dry layer film thickness
- 100 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 35 µm
- Pressure
- 3.9 bar
- Propellant
- dimethyl ether
- Recommended number of layers
- 2-3
- Solid content
- 34.2 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 686 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Weight
- 0.51
- Minimum Order Quantity
- 12
Application
-
TSP 410 application - Directions for use:
- Clean Surface: Thoroughly clean the area to remove any dirt, grease, or existing rust. Use a wire brush for stubborn rust.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Apply: Hold the can 20cm – 30cm (8-12 inches) away from the surface and spray one closed coat in a sweeping motion.
- Clean Nozzle: Invert the can and spray for 2-3 seconds to clear the nozzle.