TSP 190 - Etch primer grey 400ml
TSP 190
Specially formulated for bare metal surfaces. This primer not only ensures excellent anticorrosion protection but also offers the convenience of being overpaintable without the need for sanding, allowing for a seamless application of any 1K or 2K primer/filler. Trust our Etch Primer to provide a strong foundation for your metal projects, ensuring both durability and ease of use.
Key features
-
- • Etching primer for bare metal surfaces. Provides excellent anticorrosion protection.
-
- • Overpaintable without sanding with any 1K or 2K primer/filler.
Product details
- Colour
- grey
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 25 °C
- Number
- TSP 190
- Storing condition
- dark
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Base ingredient(s)
- zinc phosphate titanium dioxide carbon black
- Coverage
- 3 m²/L
- Dry layer film thickness
- 30 µm
- Gloss level
- 30 %
- Lead-free
- yes
- Particle size
- 40 µm
- Pressure
- 3.5 bar
- Propellant
- dimethyl ether
- Recommended number of layers
- 2-3
- Solid content
- 13.3 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 710 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Resprayable after
- 30 minutes
- Weight
- 0.4
- Minimum Order Quantity
- 12
Application
-
TSP 190 application - Directions for use:
- Surface Prep: Thoroughly clean the surface to remove grease, oil, and dirt. Sanding is recommended for best adhesion.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Application: Apply a small amount to an inconspicuous area to test for compatibility.
- Application: Hold the can 20 – 30cm (8-12 inches) from the surface and apply a thin, uniform layer.
- Drying: Allow a minimum of 10 minutes for the primer to become touch dry.
- Overcoat: Apply paint or another primer within 1 hour for best results.
- Nozzle Maintenance: Clear the nozzle by inverting the can and spraying for a few seconds.