TSP 210 - Spray anti-gravel grey 400ml
TSP 210
Available in both light grey and black variants. This innovative solution comes equipped with a round, thick spray jet designed for applying the viscous product in thicker layers. Achieve the perfect composition by applying layers crosswise at a distance of 35cm. For a glossier finish, simply shorten the spraying distance. Our Anti-gravel is compatible with all 1K and 2K paints, offering versatility and durability for your protective coating needs.
Key features
-
- • Anti-gravel is available in light grey and black, supplied with a round thick spray jet to apply the viscous product in thicker layers.
-
- • To get a composition of layers: apply layers crosswise at a distance of 35cm.
-
- • Shortening the distance provides a more glossy result.
-
- • Can be painted with all 1 and 2K paints.
Product details
- Colour
- grey
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 25 °C
- Number
- TSP 210
- Storing condition
- dark
- 1K product
- yes
- 2K product
- no
- Anti-corrosion
- yes
- Base ingredient(s)
- titanium dioxide carbon black synthetic resin rubber
- Coverage
- 2 m²/L
- Dry layer film thickness
- 150 µm
- Gloss level
- 0 %
- Lead-free
- yes
- Particle size
- 100 µm
- Pressure
- 4.9 bar
- Propellant
- propane
- Recommended number of layers
- 2-3
- Solid content
- 30.2 g/ml
- Solvents
- yes
- Type
- aerosol
- VOC
- 544 g/L
- Volume
- 0.4 L
- Workable surface state
- dry
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 672
- Minimum Order Quantity
- 12
Application
-
TSP 1500 application - Directions for use:
- Surface Preparation: Clean the surface to remove dust and/or grease. Sand with P180 – P220 for better adhesion.
- Shake Well: Shake the can vigorously for at least 2 minutes after the mixing ball starts rattling.
- Test Spray: Apply to a test area to ensure compatibility and desired texture.
- UV-Curing: Leave +-30 seconds flash off before curing, expose the coated area to 7mw/cm² for 3-5 minutes or as manufacturer guidelines to cure. Finixa UVL 00: 1 layer or 3 layers: 45 – 60 seconds full exposure 2 layers : 60 – 90 seconds full exposure
- Top Coating: Once fully cured, the surface is ready for top coating or further preparation.
- Nozzle Maintenance: Invert the can and spray for 2-3 seconds to clear the nozzle.
- 1- layer: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- 2- layers: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- Flash off for +-10 seconds Spray a 2nd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- 3- layers: Spray a full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes,
- Flash off for +-10 seconds
- Spray a 2nd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.
- Flash off for +-20 seconds
- Intermediate curing 90 seconds with at 7mw/cm² at 395nm (60 seconds with Finixa UVL 00)
- Spray a 3rd full coat from a distance of 20cm – 30cm (8-12 inches) in even overlapping strokes.