Application

CBP application
Directions for use with spray gun:

1. Use a 1.8 - 2.5 nozzle. Spray pressure: 2-3 bar.
2. Layer thickness: 125 mμ. The layer thickness determines how fast the product dries out.
3. For an optimal application we recommend to apply the product in 3 layers. After applying a layer wait 20 minutes before applying another.
4. Cabin 7 x 4 x 3: average consumption 15L

Directions for use with brush/roll:

1. To prevent the coating from dripping, apply a thin smooth layer on vertical surfaces.

Directions for use with pressure tank:

1. Apply using a pressure tank (e.g. SPG 80) equipped with a 2.0–2.5 mm nozzle. Set the pressure in the tank to 2.0–2.5 bar.
2. Do not dilute the product.
3. Apply in one continuous, closed coat. When the applied layer starts to dry, an additional coat can be applied. A maximum of three coats may be applied in total.
4. Clean tools and equipment immediately after use with warm water and a sponge, optionally with a drop of liquid soap, or by using a high-pressure cleaner.

Attention
At often rising temperatures (>67C°), Spray booth protect basicdries faster. Do not use at a temperature under 5°C.
Maintenance
The ease of removing the product strongly depends on the thickness of the applied layers, the temperature in the spray cabin, the frequency the cabin is used and the period of time the product has been on the walls. For intensive use: (more than 5 times a day) we recommend to apply an extra layer on the existing layer once a month, in order to re-activate the effects. When the product doesn’t stick anymore wash all layers with water and apply 3 new layers, as described above.