CPF 11 - Protection film spray booth lighting 600mm x 100m
CPF 11
Our high-tack transparent masking film is suitable for both interior and exterior applications. It features a water-based acrylic adhesive and a U.V. inhibitor. This transparent adhesive film is designed to safeguard lighting fixtures inside a spray booth while minimizing the loss of lighting intensity. It leaves no glue residue after removal and can also be used to cover broken windshields.
Key features
-
- • A high-tack transparent masking film for interior and exterior use with a water-based acrylic adhesive and a U.V. inhibitor.
-
- • Transparent adhesive film to protect the lighting fixtures inside a spraybooth with a minimum loss of lighting intensity
-
- • Does not leave glue residue after removal
-
- • Can also be used to cover broken wind shields
Product details
- Number
- CPF 11
- Application areas
- interior walls lighting
- Removal
- peelable
- Tacky coating
- yes
- Sales unit
- 1
- Units for outer box
- 1
- Units for pallet
- 72
Application
-
CPF application - Directions for use:
Before application make sure the surface is dirt, grease and dust free. CPF is ready to use and needs no pre-treatment and can be applied directly onto the surface.When used on light fixtures:
- Make sure the windows are dirt, grease and dust free.
- Spray some water of the windows.
- Apply CPF to the windows.
- Use a scraper (no cutter) to push away the water under the foil to get a bubble-free application.
- Cut the foil to shape of the light fixtures.
- CPF foils cannot be used on stainless steel.
- CPF foils are not suitable for outdoor applications.