CBP P - Spray booth protect performance
CBP 05P-25P
Key features
-
- • Transparant, tacky and washable coating for the protection of spraybooth walls against overspray. Product stays tacky in order to hold on to swirling dust.
-
- • Apply with spray gun (2.5) in two or three coats. The thicker the total coat, the longer it stays active. Applying another coat after some time will re-activate the product.
-
- • Remove afterwards with water and sponge.
-
- • Biodegradable.
-
- • Remove or apply another coat when the product is no longer tacky.
-
- • Average consumption per spraybooth: 15L.
-
- • Depending on temperature and humidity, product will stay tacky for 6 - 8 weeks.
-
- • Can be applied over 2 dried layers of powerpeel for easy removal
-
- • Number of layers (min-max): 2/4
Product details
- Number
- CBP 05P-25P
- Application areas
- walls
- Removal
- washable
- Tacky coating
- yes
Application
-
CBP P applicationDirections for use with spray gun:
- Use a spray gun with nozzle 2.0 – 2.5mm. Spraying pressure should be at 2-3 bar.
- Do NOT dilute the product.
- Apply in a minimum of 2 closed layers. Coats can be built up to a total of 4.
- Clean using hot water and sponge, with addition of a drop of liquid soap, or pressure sprayer.
- Use a pressure tank like our SPG 80, with a nozzle 2.0-2.5mm. pressure in the tank should be at 2.0-2.5 bar.
- Do NOT dilute the product.
- Apply in 1 closed layer.
- When product starts drying out, apply an additional coat. Coats can be built up to a total of 3.
- Clean using hot water and sponge, with addition of a drop of liquid soap, or pressure sprayer.
- Apply a thin smooth layer, to prevent product from dripping / sagging.
- Do NOT dilute the product.
- Re-apply after product loses stickiness.