GAP - Polyester putty – light and easy to sand
GAP 90-93
Key features
-
- • Easy to sand light polyester putty
-
- • Very smooth finish
-
- • Pinhole-free due to self-leveling ability
-
- • Ideal for spot and smart repair
-
- • No finishing putty needed afterward
-
- • Universal adhesion
-
- • Much lower viscosity compared to GAP 30
Product details
- Colour
- beige
- Dry storage
- yes
- Freezing resistant
- no
- Material
- polyester
- Minimum storing temperature
- 5 °C
- Number
- GAP 90-93
- Amount of hardener
- 2 %
- Maximum air humidity
- 80 %
- Maximum temperature resistance - uncured
- 3 °C
- Minimum processing temperature
- 10 °C
- Recommended curing temperature - IR
- 45 °C
- VOC
- 10 g/L
- Workable surface state
- dry
- Storing condition
- dark
- Time until sandable
- 20 minutes
- Minimum Order Quantity
- 8
Application
-
Application GAP xx - Directions for use:
- Degrease surface before applying putty. Use 2 cloths in the process.
- Weigh needed amount of putty for the job.
- Add 2% of BPO hardener.
- Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
- Apply putty to desired surface.
- Allow to cure, time will be influenced by humidity and temperature.
- Sand, and re-apply if necessary.
DETAIL28810
https://www.youtube.com/embed/X9sGCMjfrW0?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/X9sGCMjfrW0?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28810
https://www.youtube.com/embed/X9sGCMjfrW0?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/X9sGCMjfrW0?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1