GAP 50 - Polyester putty 2kg + hardener - alu
GAP 50
An advanced filler enhanced with aluminum particles. Designed for body parts exposed to mechanical stress, it's ideal for filling coarse irregularities, pores, and holes. This putty exhibits excellent adhesion on iron, steel, aluminum, galvanized substrates, and glass fiber-reinforced materials. It maintains stability on vertical surfaces and can endure temperatures exceeding 90°C, offering high elasticity and ease of sanding.
Key features
-
- • Polyester putty refined with aluminum particles
-
- • Perfect for use on body parts subject to mechanical stress
-
- • Used to fill coarse irregularities, pores and holes
-
- • Good adhesion on iron, steel, aluminum, galvanized substrates and glass fiber reinforced materials
-
- • Good stability on vertical surfaces
-
- • Can withstand temperatures of more than 90°C
-
- • High elasticity
-
- • Good sandability
-
- • Colour: aluminium grey
Product details
- Colour
- silver
- Dry storage
- yes
- Freezing resistant
- no
- Material
- polyester
- Minimum storing temperature
- 5 °C
- Number
- GAP 50
- Amount of hardener
- 2 %
- Filling substance
- alu dust
- Height
- 8.5 cm
- Maximum air humidity
- 80 %
- Maximum temperature resistance - uncured
- 5 °C
- Minimum processing temperature
- 10 °C
- Recommended curing temperature - IR
- 45 °C
- Specific weight (g/L)
- 2 g/L
- Stack support
- no
- VOC
- 50 g/L
- Volume
- 1.3 L
- Workable surface state
- dry
- Storing condition
- dark
- Sales unit
- 1
- Units for outer box
- 6
- Units for pallet
- 288
- Shelf life
- 18 months
- Time until sanding - IR
- 10 minutes
- Product weight
- 1671 g
- Time until sandable
- 20 minutes
- Minimum Order Quantity
- 6
Application
-
Application GAP xx - Directions for use:
- Degrease surface before applying putty. Use 2 cloths in the process.
- Weigh needed amount of putty for the job.
- Add 2% of BPO hardener.
- Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
- Apply putty to desired surface.
- Allow to cure, time will be influenced by humidity and temperature.
- Sand, and re-apply if necessary.
- 5 minutes