GAP 00 - Polyester putty 2kg + hardener - GAPOL
GAP 00
GAPOL Black Polyester Putty, your universal solution for surface repairs. With outstanding adhesion on various surfaces like old paint, steel, metals, wood, and MDF, it excels in finishing plastic repairs. Its unique black color aids in visual inspection during application and sanding, highlighting irregularities. After degreasing, it returns to a deep black color, simplifying inspection. Built-in guides ensure the correct thickness and offer sanding-through guidance.
Key features
-
- • Black universal polyester putty
-
- • Similar to “MULTI” putty but black colour
-
- • Universal adhesion on old painted surfaces, steel, light metals, galvanized steel, aluminium, wood and MDF
-
- • Perfect to finish plastic repairs
-
- • Visual aid during application (black shining filler); makes it easy to see all irregularities & imperfections
-
- • Built-in sanding guide: during sanding the putty fades from black to dark grey
-
- • The spots that are too low (not sanded) clearly remain black
-
- • Once degreased, the filler regains its deep black colour; inspecting for possible irregularities is easy now.
-
- • Built-in coating guide: whether one finishes with beige or grey filler, once the black colour is covered, one can also be sure of the necessary thickness of the filler coating.
-
- • Built-in sanding through guide: if afterwards one would sand through the putty accidentally, the black base will occur as a sanding-through guide.
Product details
- Colour
- black
- Dry storage
- yes
- Freezing resistant
- no
- Material
- polyester
- Minimum storing temperature
- 5 °C
- Number
- GAP 00
- Amount of hardener
- 2 %
- Application surfaces
- steel E-coating galvanized steel aluminum aluminium RMS fiberglass hard plastic soft plastic wood zinc copper stainless steel carbon fiber
- Diameter
- 16.2 cm
- Filling substance
- carbon
- Height
- 8.5 cm
- Maximum air humidity
- 80 %
- Maximum temperature resistance - cured
- 80 °C
- Maximum temperature resistance - uncured
- 3 °C
- Minimum processing temperature
- 10 °C
- Recommended curing temperature - IR
- 45 °C
- Specific weight (g/L)
- 1.83 g/L
- Stack support
- no
- Type
- tin
- VOC
- 15 g/L
- Volume
- 1.09 L
- Workable surface state
- dry
- Storing condition
- dark
- Sales unit
- 1
- Units for outer box
- 6
- Units for pallet
- 288
- Shelf life
- 18 months
- Time until sanding - IR
- 15 minutes
- Product weight
- 2160 g
- Time until sandable
- 30 minutes
- Minimum Order Quantity
- 6
Application
-
Application GAP xx - Directions for use:
- Degrease surface before applying putty. Use 2 cloths in the process.
- Weigh needed amount of putty for the job.
- Add 2% of BPO hardener.
- Mix well, always try to squeeze out as much air as possible to avoid air inclusion and pinholes.
- Apply putty to desired surface.
- Allow to cure, time will be influenced by humidity and temperature.
- Sand, and re-apply if necessary.
DETAIL28817
https://www.youtube.com/embed/alIMDGujoHw?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/alIMDGujoHw?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28817
https://www.youtube.com/embed/alIMDGujoHw?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/alIMDGujoHw?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1