SPG 700 - Mini spray gun PRO - 0.8mm nozzle kit
SPG 700
The Mini Spray Gun PRO is a precision tool designed for spot repairs, featuring LVLP technology for over 74% effective transfer efficiency. Crafted with a lightweight anodized aluminum body and an ergonomic grip, this spray gun ensures fine atomization and an adjustable spray pattern. The 100% stainless steel fluid passages eliminate rubber parts from the design for durability. Standard equipped with a 0.8mm needle, additional needles (0.8mm, 1.0mm, 1.2mm) are also available separately. The inclusion of a 100ml cup adds convenience to its professional performance.
Key features
-
- • LVLP technology: over 74% effective transfer efficiency
-
- • Specifically developed for spot repair
-
- • Lightweight anodized aluminium body, ergonomic grip
-
- • 100% stainless steel fluid passages, no rubber parts in the design
-
- • Fine atomization, adjustable spray pattern
-
- • Required air feed pressure: 1.5 bar
-
- • Standard with a 0.8mm needle. Needles 0.8mm, 1.0mm, 1.2mm also available separately.
-
- • Incl.cup 100 ml
Product details
- Colour
- silver
- Dry storage
- yes
- Freezing resistant
- yes
- Material
- annodized aluminium
- Number
- SPG 700
- Air consumption
- 200 L/min
- Air feed pressure
- 1.5 bar
- Feed-type
- gravity
- Needle seal type
- teflon (PTFE)
- Transfer efficiency
- 74 %
- Use with paint type
- water-based solvent-based
- Sales unit
- 1
- Units for outer box
- 20
- Units for pallet
- 840
- Weight
- 0.322
- Product weight
- 322 g
- Pattern width
- 16 cm
- Possible nozzle orifice
- 0,8 ; 1,0 ; 1,2 mm
Application
-
SPG application - Directions for use
- Clean and degrease spray gun before first use, this way you make sure there is no contamination inside when you start using the product.
- Check nozzle size with paint manufacturer technical recommendations, switch when needed.
- Attach spray cup clockwise on spray gun.
- Put desired coating in the spray cup.
- Close lid.
- Apply air pressure according to technical recommendations.
- Spray coating.
- After finishing work, always make sure to disassemble and clean the spray gun using proper cleaning agents according the used coating.
- Blow dry spray gun after cleaning.
- Store in clean conditions until next use.
DETAIL28777
https://www.youtube.com/embed/kthyybmyBNo?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/kthyybmyBNo?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28844
https://www.youtube.com/embed/It4ksNfn29Y?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/It4ksNfn29Y?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28777
https://www.youtube.com/embed/kthyybmyBNo?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/kthyybmyBNo?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28844
https://www.youtube.com/embed/It4ksNfn29Y?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/It4ksNfn29Y?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1