SPG 100 - Spray gun spot repair CC100, nozzle 0.8mm
SPG 100
The Finixa Mini Spray Gun is designed for maximum efficiency and precision. With an ergonomic grip and lightweight anodized aluminum body, it ensures minimal overspray and over 74% effective transfer efficiency using LVLP technology. Suitable for both water-based and solvent-based paints, it comes standard with a 0.8mm nozzle and includes a 100ml cup. Additional nozzles are available for versatility.
Key features
-
- • Ergonomic grip
-
- • Minimal overspray, maximum transfer efficiency
-
- • LVLP technology: over 74% effective transfer efficiency
-
- • Lightweight anodized aluminium body
-
- • Can be used for water-based and solvent-based paints
-
- • Required air feed pressure: 1.5 bar
-
- • Standard with a 0.8mm nozzle. Nozzles 0.8mm, 1.0mm, 1.1mm, 1.2mm also available separately
-
- • Incl. cup 100 ml (also available as spare part SPG 100C)
Product details
- Colour
- silver
- Dry storage
- yes
- Freezing resistant
- yes
- Material
- annodized aluminium
- Number
- SPG 100
- Air consumption
- 75 L/min
- Air feed pressure
- 1.5 bar
- Connection
- M14 x 1
- Feed-type
- gravity
- Fluid output
- 95 ml/min
- Needle seal type
- rubber
- Spray distance
- 16 cm
- Transfer efficiency
- 74 %
- Use with paint type
- water-based solvent-based
- Sales unit
- 1
- Units for outer box
- 20
- Weight
- 0.263
- Product weight
- 263 g
- Pattern width
- 13 cm
- Possible nozzle orifice
- 0,8 ; 1,0 ; 1,1 ; 1,2 mm
Application
-
SPG application - Directions for use
- Clean and degrease spray gun before first use, this way you make sure there is no contamination inside when you start using the product.
- Check nozzle size with paint manufacturer technical recommendations, switch when needed.
- Attach spray cup clockwise on spray gun.
- Put desired coating in the spray cup.
- Close lid.
- Apply air pressure according to technical recommendations.
- Spray coating.
- After finishing work, always make sure to disassemble and clean the spray gun using proper cleaning agents according the used coating.
- Blow dry spray gun after cleaning.
- Store in clean conditions until next use.