A rapid UV-curing clear coat designed for efficient and cost-effective repairs of stone chips and scratches. This 1-component solution ensures fast curing without shrinkage, delivering a high-quality finish comparable to a 2K clear coat. Achieve the same strength, durability, and chemical resistance, with the added benefit of being sandable and polishable after just 45 seconds of curing using our Stone Chip Curing Lamp (SCL 00).
Key features
-
- • Fast UV curing clear coat for stone chip and scratch repair
-
- • Fast, simple and cost effective repair of stone chips and scratches
-
- • 1-component, fast curing
-
- • No shrinkage after curing
Product details
- Number
- SCU 20
- Sales unit
- 1
- Units for outer box
- 12
Application
-
SCL 00 – SCU 20 application
Directions for use
- Clean/degrease the surface with TSP 600 Foam-it!
- Sand around the stone chip with SPDM P1500-2000
- Clean with TSP 600 Foam-it!
- Apply the base coat
- Dry the base coat
- Apply stone chip repair UV with PMP touch-up tips
- Dry for 45 seconds at 20mm distance with stone chip curing lamp SCL 00
- Remove excess clear coat with DRF 10 dust removal file
- Sand with SPDR P1500-2000
- Polish with Finixa polishing system
Pre-cautions:
- Never shine the lamp towards eyes or look directly into the lamp, if needed wear proper eye-protection.
- Never shine directly on the skin, if needed wear gloves.
DETAIL28824
https://www.youtube.com/embed/vhp_LD5io68?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/vhp_LD5io68?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28824
https://www.youtube.com/embed/vhp_LD5io68?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/vhp_LD5io68?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1