SSS 100 - Sprayable seam sealer 290ml white
SSS 100
High-quality MS Polymer formulation for firm-setting applications in auto body seams and joints. This versatile sealer requires no primer, offers excellent adhesion, and allows for paintability after just 30 minutes. Achieve precise application with our Combi Sealant Gun (CSG 00) in areas like door skins and body panels. The standard 290ml cartridge fits all caulking guns, and it's available in white, grey, black, and beige colors.
Key features
-
- • MS Polymer
-
- • Firm-setting sealer for interior and exterior auto body seams and joints.
-
- • Replaces and repairs factory sealing jobs in trunk, floor and drip rail areas.
-
- • No primer needed, good adhesion, lasting flexibility.
-
- • Atomised, by using a combi sealant gun (CSG 00), the seam sealer can be used inside door skins, inside body panels, or any area where a sound deadening and/or structured coating is needed.
-
- • Standard 290ml cartridge, fits in all standard caulking guns.
-
- • Available in white, grey, black and beige colour.
-
- • Paintable after 30 minutes with any primer, water- or solvent-based basecoat or topcoat.
Product details
- Application areas
- interior exterior glazing joints
- Application surfaces
- steel E-coating galvanized steel aluminum fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate
- Base ingredient(s)
- MS polymer
- Corrosive to metals
- no
- Elongation at break
- 375 %
- Free of isocyanates
- yes
- Free of silicones
- yes
- Length
- 5 cm
- Maximum processing temperature
- 40 °C
- Maximum temperature resistance
- 90 °C
- Minimum processing temperature
- 5 °C
- Minimum temperature resistance
- -40 °C
- Paint type
- water-based solvent-based
- Paintable
- yes
- Resistances
- UV
- Shore-A hardness
- 40
- Skinformation - 23°C / 55%RH
- 15 minutes
- Time until paintable
- 15 minutes
- Type
- cartridge
- Volume
- 290 ml
- Width
- 5 cm
- Workable surface state
- dry
- Colour
- white
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 90 °C
- Minimum storing temperature
- -40 °C
- Number
- SSS 100
- Storing condition
- dark
- Sales unit
- 1
- Units for outer box
- 12
- Units for pallet
- 1248
- Tensile Strength (Ncm)
- 115 N/cm²
- Shelf life
- 18 months
- Weight
- 1
- Product weight
- 464 g
Application
-
SSS 100-200-300-400 application - Directions for Use
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Cartridge Loading: Insert the cartridge into a compatible spray gun.
- Test Spray: Perform a test spray on a scrap surface to ensure proper flow and pattern.
- Application: Spray the seam sealer evenly along the seam, joint, or surface to be sealed or use a (pneumatic) applicator gun to spray the sealer onto the surface.
- Cure Time: Allow 24 hours for a layer thickness of 2-3mm to fully cure.
DETAIL28802
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28802
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1