SSS - Sprayable seam sealer 290ml
SSS 100-400
Key features
-
- • MS Polymer
-
- • Firm-setting sealer for interior and exterior auto body seams and joints.
-
- • Replaces and repairs factory sealing jobs in trunk, floor and drip rail areas.
-
- • No primer needed, good adhesion, lasting flexibility.
-
- • Atomised, by using a combi sealant gun (CSG 00), the seam sealer can be used inside door skins, inside body panels, or any area where a sound deadening and/or structured coating is needed.
-
- • Standard 290ml cartridge, fits in all standard caulking guns.
-
- • Available in white, grey, black and beige colour.
-
- • Paintable after 30 minutes with any primer, water- or solvent-based basecoat or topcoat.
Product details
- Application areas
- interior exterior glazing joints
- Application surfaces
- steel E-coating galvanized steel aluminum fiberglass hard plastic soft plastic chrome rubber new paint good paint neglected paint matt paint gelcoat putty primer/filler OEM paint refinish paint wood zinc enamel ceramic copper lead stainless steel high-pressure laminate stone concrete gypsum board cement fiber panels polyethylene polypropylene polycarbonate polymethyl methacrylate
- Base ingredient(s)
- MS polymer
- Corrosive to metals
- no
- Free of isocyanates
- yes
- Free of silicones
- yes
- Length
- 5 cm
- Maximum processing temperature
- 40 °C
- Maximum temperature resistance
- 90 °C
- Minimum processing temperature
- 5 °C
- Minimum temperature resistance
- -40 °C
- Paint type
- water-based solvent-based
- Paintable
- yes
- Resistances
- UV
- Type
- cartridge
- Volume
- 290 ml
- Workable surface state
- dry
- Colour
- white
- Dry storage
- yes
- Freezing resistant
- yes
- Maximum storing temperature
- 90 °C
- Minimum storing temperature
- -40 °C
- Number
- SSS 100-400
- Storing condition
- dark
- Weight
- 1
Application
-
SSS 100-200-300-400 application - Directions for Use
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Cartridge Loading: Insert the cartridge into a compatible spray gun.
- Test Spray: Perform a test spray on a scrap surface to ensure proper flow and pattern.
- Application: Spray the seam sealer evenly along the seam, joint, or surface to be sealed or use a (pneumatic) applicator gun to spray the sealer onto the surface.
- Cure Time: Allow 24 hours for a layer thickness of 2-3mm to fully cure.
DETAIL28802
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
DETAIL28802
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
https://www.youtube.com/embed/HL8JqIBL9Ho?origin=https://plyr.io&iv_load_policy=3&modestbranding=1&playsinline=1&showinfo=0&rel=0&enablejsapi=1
Downloads
Language
| Name | Asset type | Language | File type | Download | |
|---|---|---|---|---|---|
|
|
SSS 100 - SDS - EN.pdf | SDS | English | Download | |
|
|
SSS 200 - SDS - EN.pdf | SDS | English | Download | |
|
|
SSS 300 - SDS - EN.pdf | SDS | English | Download | |
|
|
SSS 400 - SDS - EN.pdf | SDS | English | Download | |
|
|
SSS - TDS - Finixa - EN.pdf | TDS | English | Download | |
|
|
05 Product comparison.pdf | Product_comparison | English | Download |