PLI 01 - Plastic repair 'fast' (25sec.) black - 50ml
PLI 01
Explore our Plastic Repair Sets designed to cater to various needs:
PLI 01 - Plastic Repair Set "Fast"
Ideal for bonding and repairing fixings and brackets.
Quick 25-second open time.
Work time of 25 seconds.
Sand after just 5 minutes.
Clamp time of 3 minutes.
PLI 02 - Plastic Repair Set "Medium"
Perfect for repairing tears and cracks.
Open time of 1.5 minutes.
Work time of 1.5 minutes.
Sand after 10 minutes.
Clamp time of 5 minutes.
PLI 03 - Plastic Repair Set "Slow"
Suitable for repairing tears and cracks with a longer process time.
Extended 3.5-minute open time.
Work time of 5 minutes.
Sand after 30 minutes.
Clamp time of 10 minutes.
Choose the Plastic Repair Set that fits your specific requirements for efficient and effective plastic repairs.
Product details
- Colour
- black
- Dry storage
- yes
- Material
- polyurethan
- Maximum storing temperature
- 32 °C
- Minimum storing temperature
- 15 °C
- Number
- PLI 01
- Applicable for
- bonding sealing repairing
- Application areas
- interior exterior
- Application surfaces
- hard plastic soft plastic wood concrete thermosetting composites carbon fiber coated metals
- Elongation
- 46 %
- Maximum baking temperature
- 150 °C
- Maximum processing temperature
- 120 °C
- Optimal bondline thickness
- 500 µm
- Paint type
- water-based solvent-based
- Paintable
- yes
- Resistances
- moisture
- Shrinkage
- yes
- Spotweldable
- no
- Type
- cartridge
- Volume
- 50 ml
- Workable surface state
- dry
- Storing condition
- dark
- Sales unit
- 1
- Units for outer box
- 6
- Shelf life
- 24 months
- Time until paintable
- 5 minutes
- Time until sandable
- 5 minutes
- Working time
- 2.5 minutes
- Minimum Order Quantity
- 6
Application
-
PLI 01-02-03 application - Directions for Use:
- Choose Open Time: Pick the appropriate open time cartridge based on your project needs.
- Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
- Cartridge Insertion: Load the 2K PU cartridge into a compatible dual-barrel dispensing gun.
- Mixing and Application: Dispense a small test amount for mixing, then apply the adhesive on the surfaces to be bonded.
- Join and Clamp: Align and press the parts together, securing them in place as the adhesive cures.
- Curing: Allow sufficient time for full curing, as per product guidelines.
- Temp:23°C - Open time - Work time - Clamp time - Sandable after
- PLI 01 - 25 sec - 25 sec - 1 min - 1 min
- PLI 02 - 1,5 min - 1,5 min - 5 min - 10 min
- PLI 03 - 3,5 min - 5 min - 10 min - 30 min