PLI - Plastic repair black - 50ml

Application

PLI 01-02-03 application - Directions for Use:

1. Choose Open Time: Pick the appropriate open time cartridge based on on the complexity of the repair.
2. Surface Preparation: f possible, sand the to be treated surface with a coarse abrasive P80 – 120 in combination with punctered holes to ensure both mechanical and chemical bonding. Before applying all surfaces need to be clean, dry, free of grease and dust.
3. Cartridge Insertion: Load the 2K PU cartridge into a compatible dual-barrel dispensing gun.
4. Mixing and Application: Mixing and Application: Dispense a small test amount from the nozzle to make sure the components are properly mixed, then apply the adhesive on the surfaces to be bonded/repaired. Use the reinforcement canvas for tears or cracks or bigger repairs.
5. Fixings and brackets: Align and press the parts together, securing them in place as the adhesive cures.
6. Tears, cracks or remoulding: use the contour canvas to align the product to the shape of the plastic part.
7. Curing: Allow sufficient time for full curing, as per product guidelines.
8. Temp:23°C - Open time - Work time - Clamp time - Sandable after
9. PLI 01 - 25 sec - 25 sec - 1 min - 1 min
10. PLI 02 - 1,5 min - 1,5 min - 5 min - 10 min
11. PLI 03 - 3,5 min - 5 min - 10 min - 30 min