PLI 03 - Plastic repair 'slow' (3.5min.) black - 50ml
PLI 03
Product details
- Colour
- black
- Dry storage
- yes
- Material
- polyurethan
- Maximum storing temperature
- 32 °C
- Minimum storing temperature
- 15 °C
- Number
- PLI 03
- Applicable for
- bonding sealing repairing
- Application areas
- interior exterior
- Application surfaces
- hard plastic soft plastic wood concrete thermosetting composites carbon fiber coated metals
- Elongation
- 46 %
- Maximum baking temperature
- 150 °C
- Maximum processing temperature
- 120 °C
- Optimal bondline thickness
- 500 µm
- Paint type
- water-based solvent-based
- Paintable
- yes
- Resistances
- moisture
- Shrinkage
- yes
- Spotweldable
- no
- Type
- cartridge
- Volume
- 50 ml
- Workable surface state
- dry
- Storing condition
- dark
- Sales unit
- 1
- Units for outer box
- 6
- Shelf life
- 24 months
- Time until paintable
- 30 minutes
- Time until sandable
- 30 minutes
- Working time
- 5 minutes
- Minimum Order Quantity
- 6
Application
-
PLI 01-02-03 application - Directions for Use:
- Choose Open Time: Pick the appropriate open time cartridge based on on the complexity of the repair.
- Surface Preparation: f possible, sand the to be treated surface with a coarse abrasive P80 – 120 in combination with punctered holes to ensure both mechanical and chemical bonding. Before applying all surfaces need to be clean, dry, free of grease and dust.
- Cartridge Insertion: Load the 2K PU cartridge into a compatible dual-barrel dispensing gun.
- Mixing and Application: Mixing and Application: Dispense a small test amount from the nozzle to make sure the components are properly mixed, then apply the adhesive on the surfaces to be bonded/repaired. Use the reinforcement canvas for tears or cracks or bigger repairs.
- Fixings and brackets: Align and press the parts together, securing them in place as the adhesive cures.
- Tears, cracks or remoulding: use the contour canvas to align the product to the shape of the plastic part.
- Curing: Allow sufficient time for full curing, as per product guidelines.
- Temp:23°C - Open time - Work time - Clamp time - Sandable after
- PLI 01 - 25 sec - 25 sec - 1 min - 1 min
- PLI 02 - 1,5 min - 1,5 min - 5 min - 10 min
- PLI 03 - 3,5 min - 5 min - 10 min - 30 min